LevelOne KVM-0420 Manual - Page 5
Initial Power-Up
View all LevelOne KVM-0420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
LevelOne Figure 6: Computer USB Port Connection Initial Power-Up You must power up the Master KVM switch that has a PS/2 keyboard, mouse and monitor connected to it before turning on any other devices. ! For single KVM Switch: 1) Apply a power adapter (O/P = 9V DC) to the Master. 2) Turn on computers. ! For cascaded KVM Switches: 1) Apply a power adapter (O/P = 9V DC) to the Master. 2) Apply power adapters to all Slaves. 3) Turn on computers. Note: You may hot plug additional powered-down computers or a slave Switches without turning any existing KVM switch or computer off after initial power up. 7 LevelOne 8
LevelOne
7
Figure 6: Computer USB Port Connection
Initial Power-Up
You must power up the Master KVM switch that has a PS/2
keyboard, mouse and monitor connected to it before turning on
any other devices.
!
For single KVM Switch:
1)
Apply a power adapter (O/P = 9V DC) to the
Master
.
2)
Turn on computers.
!
For cascaded KVM Switches:
1)
Apply a power adapter (O/P = 9V DC) to the
Master
.
2)
Apply power adapters to all
Slaves
.
3)
Turn on computers.
Note:
You may hot plug additional powered-down computers or a
slave Switches without turning any existing KVM switch or computer
off after initial power up
.
LevelOne
8