Lexmark C782 User's Guide - Page 51

Media specifications Printing on letterhead Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for laser printers. Page orientation is important when printing on letterhead. Use the following table for help when loading letterhead in the media sources. Media source or process Trays Duplex (two-sided) printing from trays Multipurpose feeder Duplex (two-sided) printing from multipurpose feeder Print side Printed letterhead face down Printed letterhead face up Printed letterhead face up Printed letterhead face down Top of page Letterhead goes toward the left of the tray. Letterhead goes toward the right of the tray. The top of the letterhead should be inserted into the feeder. The top of the letterhead should be at the top or right hand side of the feeder. Transparencies Feed transparencies from the standard tray or the multipurpose feeder. Try a sample of any transparencies being considered for use with the printer before buying large quantities. When printing on transparencies: • Be sure to set the Paper Type to Transparency from the printer driver, MarkVision™ Professional, or the operator panel to avoid damaging the printer. • Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures of 230°C (446°F) without melting, discoloring, offsetting or releasing hazardous emissions. • To prevent print quality problems, avoid getting fingerprints on the transparencies. • Before loading transparencies, fan the stack to prevent sheets from sticking together. Selecting transparencies The printer can print directly on transparencies designed for use in laser printers. Print quality and durability depend on the transparency used. Always print samples on the transparencies being considered for use before buying large quantities. Lexmark recommends Lexmark Part Number 12A8240 letter size transparency and Lexmark Part Number 12A8241 A4 size transparency. The Paper Type setting should be set to Transparency to help prevent jams. (See "Paper Type" in the Menus and Messages Guide on the publications CD for detailed information about this setting.) Check with the manufacturer or vendor to determine whether the transparencies are compatible with laser printers that heat transparencies to 230°C (446°F). Use only transparencies that are able to withstand these temperatures without melting, discoloring, offsetting, or releasing hazardous emissions. For detailed information, see the Card Stock & Label Guide, which is available on the Lexmark Web site at www.lexmark.com/publications. Envelopes Try a sample of any envelopes being considered for use with the printer before buying large quantities. For more information, see Loading the multipurpose feeder. When printing on envelopes: • To achieve the best possible print quality, use only high-quality envelopes that are designed for use in laser printers. Storing paper 51