Lexmark CX331 Users Guide PDF - Page 24
Creating folders, Setting up the printer to fax, Setting up the fax function
View all Lexmark CX331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Set up, install, and configure 24 • For SMB, type the network folder address. For example, myServer/myShare/myFile.pdf. Type the network domain name. • If necessary, select the Authentication type for FTP and SMB. To limit access to the bookmark, enter a PIN. Note: The application supports the following file types: PDF, JPEG, TIFF, and HTML-based web pages. Other file types such as DOCX and XLXS are supported in some printer models. 4 Click Save. Creating folders 1 Open a web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer home screen. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the web page correctly. 2 Click Bookmarks > Add Folder, and then type a folder name. Note: To limit access to the folder, enter a PIN. 3 Click Save. Note: You can create folders or bookmarks inside a folder. To create a bookmark, see "Creating bookmarks" on page 23. Setting up the printer to fax Setting up the fax function Notes: • Some connection methods are applicable only in some countries or regions. • If the fax function is enabled and not fully set up, then the indicator light may blink red. • If you do not have a TCP/IP environment, then use the control panel to set up fax. Warning-Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer in the area shown while actively sending or receiving a fax.