Lexmark CX331 Users Guide PDF - Page 75
Auto LF after CR, PCLXL Minimum Line Width
View all Lexmark CX331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Use printer menus 75 Menu item Description Lines per Page 1-255 Specify the number of lines of text for each page printed through the PCL® data stream. Notes: • This menu item activates vertical escapement that causes the selected number of requested lines to print between the default margins of the page. • 60 is the U.S. factory default setting. 64 is the international factory default setting. PCL5 Minimum Line Width 1-30 (2*) Set the initial minimum stroke width. PCLXL Minimum Line Width 1-30 (2*) A4 Width 198 mm* 203 mm Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is printed. Auto CR after LF On Off* Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR On Off* Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign Tray [x] Assign Manual Paper Assign Manual Envelope Configure the printer to work with a different print driver or custom application that uses a different set of source assignments to request a given paper source. Tray Renumber View Factory Defaults Show the factory default value assigned for each paper source. Tray Renumber Restore Defaults Restore the tray renumber values to their factory defaults. Print Timeout Disabled Enabled* Set the printer to end a print job after it has been idle for the specified amount of time in seconds. Note: Print Timeout Time appears only when Print Timeout is enabled. Print Timeout Time 1-255 (90*) Note: An asterisk (*) next to a value indicates the factory default setting.