Lexmark CX510 User's Guide - Page 138
TCP/IP menu, Network/Ports, Standard Network, TCP/IP, Network [x], Network [x] Setup
View all Lexmark CX510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Understanding the printer menus 138 Use Job Timeout 0, 10-225 seconds To Set the amount of time it takes for a network print job to be canceled. Notes: • 90 seconds is the factory default setting. • A setting value of 0 disables the timeout. • If a value between 1 and 9 is selected, then Invalid appears on the display, and the value is not saved. TCP/IP menu To access the menu, navigate to either of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers that are attached to print servers. Use To Set Hostname Set the current TCP/IP hostname. IP Address View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Netmask View or change the current TCP/IP netmask. Gateway View or change the current TCP/IP gateway. Enable DHCP On Off Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP On Off Specify the RARP address assignment setting. Note: Off is the factory default setting. Enable BOOTP On Off Specify the BOOTP address assignment setting. Note: On is the factory default setting. Enable AutoIP Yes No Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable FTP/TFTP Yes No Send files to the printer using the built‑in FTP server. Note: Yes is the factory default setting. Enable HTTP Server Yes No Enable the built-in Web server (Embedded Web Server) which lets you monitor and manage the printer remotely using a Web browser. Note: Yes is the factory default setting. WINS Server Address View or change the current WINS server address.