Lexmark CX510 User's Guide - Page 266

Troubleshooting 266 • Install a flash memory card with larger capacity. Note: Downloaded fonts and macros not previously stored in the flash memory are deleted. Printer had to restart. Last job may be incomplete. From the printer control panel, touch Continue to clear the message and continue printing. For more information, visit http://support.lexmark.com or contact customer support. Reinstall missing or unresponsive [color] cartridge [31.xy] Try one or more of the following: • Install the missing toner cartridge. For more information, see the "Replacing supplies" section of the User's Guide. • Remove the unresponsive cartridge, and then reinstall it. Note: If the message appears after reinstalling the supply, then the cartridge may be defective. Replace the cartridge. Reinstall missing or unresponsive [type] imaging kit [31.xy] Note: The type can be a black imaging kit, or a black and color imaging kit. Try one or more of the following: • Install the missing imaging kit. For more information, see the "Replacing supplies" section of the User's Guide. • Remove the unresponsive imaging kit, and then reinstall it. Note: If the message appears after reinstalling the supply, then the imaging kit may be defective. Replace the imaging kit. Reload printed pages in Tray [x] Try any of the following: • From the printer control panel, touch Continue to clear the message and continue printing the second side of the sheet. • Cancel the print job. Remove defective disk [61] Remove and replace the defective printer hard disk. Note: To replace the printer hard disk, contact customer support at http://support.lexmark.com or your service representative. Remove packaging material, [area name] 1 Remove any remaining packing material from the indicated location. 2 From the printer control panel, touch Continue to clear the message.