Lexmark E360DN User's Guide - Page 71
Reports menu, Portrait Height, Feed Direction, Menu Settings Device Statistics
UPC - 734646084475
View all Lexmark E360DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Menu item Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge Description Sets the portrait height Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. Inches can be increased in 0.01-inch increments. • 356 mm is the international factory default setting. Millimeters can be increased in 1-mm increments. Specifies the feed direction Notes: • Short Edge is the factory default setting. • Long Edge appears only if the longest edge is shorter than the maximum length supported in the tray. Reports menu Reports menu To print a report, use the arrow buttons to navigate to the type of report you want, and then press . Menu item Menu Settings Page Device Statistics Network Setup Page Network Setup Page Print Fonts PCL Fonts PostScript Fonts Description Prints a report containing information about paper loaded into trays, installed memory, the total page count, alarms, timeouts, the printer control panel language, the TCP/IP address, the status of supplies, the status of the network connection, and other information Prints a report containing printer statistics such as supply information and details about printed pages Prints a report containing information about the network printer settings, such as the TCP/IP address information Note: This menu item appears only for network printers or printers connected to print servers. Prints a report containing information about the network printer settings, such as the TCP/IP address information Notes: • This menu item is available when more than one network option is installed. • This menu item appears only for network printers or printers connected to print servers. Prints a report in English of all the fonts available for the printer language currently set in the printer Note: A separate list is available for PCL and PostScript emulations. Each emulation report contains print samples and information about the available fonts for each language. Understanding printer menus 71