Lexmark E360DN User's Guide - Page 91

Programming System Code DO NOT POWER OFF Wait for the message to clear. Warning-Potential Damage: Do not turn the printer power off while Programming System Code appears on the display. Ready The printer is ready to receive print jobs. Remove paper from standard output bin Remove the stack of paper from the standard exit bin. Toner is low Try one or more of the following: • Replace the toner cartridge. • Press to clear the message and continue printing. USB/USB The printer is using a USB cable connection. The USB port is the active communication link. Waiting The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current print job. 31.yy Replace defective or missing cartridge The toner cartridge is either missing or not functioning properly. Try one or more of the following: • Remove the toner cartridge, and then reinstall it. • Remove the toner cartridge, and then install a new one. 32.yy Cartridge part number unsupported by device Remove the toner cartridge, and then install a supported one. 34 Short paper Try one or more of the following: • Load the appropriate paper in the tray. • Press the arrow buttons until Continue appears, and then press a different paper tray. to clear the message and print the job using Understanding printer messages 91