Lexmark Forms Printer 4227 Lexmark 4227 Plus User's Guide - Page 48
Stopping the Printer, Advancing the Paper, Using Tear-off
View all Lexmark Forms Printer 4227 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using the Operator Panel Stopping the Printer To temporarily stop printing, press Start/Stop until the Ready light is off. The printer finishes printing the current line and then stops printing. To resume printing, press Start/Stop until the Ready light is on. Advancing the Paper You can use the operator panel to advance the paper when the printer is not printing. To advance the paper: • Press FormFeed to advance the paper to the Top-Of-Form (TOF) on the next page or to eject the cut form. Note: If Auto Tear Off is set to On or One Second, the form stops for one second, then feeds to the Tear Off position. • Press LineFeed to advance the paper to the next line. • Press Micro ↓ or Micro ↑ lightly once for fine alignment, or press and hold to scroll the paper up or down. Note: If paper is sitting at the Tear-off position, pressing Form Feed will feed the paper one page length. Using Tear-off The Tear-off function advances the perforation of a continuous form to the tear bar. Auto Tear-off can be set to on, one second, or off. To change the tearoff position, see"Changing Tearoff position" on page 72. 42 Chapter 3: Using the Operator Panel