Lexmark M1246 Users Guide PDF - Page 44
Wireless Security Mode, WEP Authentication Mode, Set WEP Key, WPA-PSK Encryption Mode, Set Pre,
View all Lexmark M1246 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Understanding the printer menus Menu item Wireless Security Mode Disabled* WEP WPA2/WPA-Personal WPA2-Personal 802.1x - RADIUS WEP Authentication Mode Auto* Open Shared Set WEP Key WPA-PSK Encryption Mode AES Set Pre‑Shared Key WPA2-PSK Encryption Mode AES 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off Set Static IP Address IP Address Netmask Gateway 44 Description Set the type of security for connecting the printer to wireless devices. Set the type of Wireless Encryption Protocol (WEP) used by the printer. Note: This menu item appears only if Wireless Security Mode is set to WEP. Specify a WEP password for secure wireless connection. Enable wireless security through Wi-Fi Protected Access (WPA). Note: This menu item appears only if the Wireless Security Mode is set to WPA2/WPA-Personal or WPA2-Personal. Set the password for secure wireless connection. Enable wireless security through WPA2. Note: This menu item appears only if the Wireless Security Mode is set to WPA2/WPA-Personal or WPA2-Personal. Enable wireless security through 802.1x standard. Note: This menu item appears only if the Wireless Security Mode is set to 802.1x - Radius. Enable and configure IPv4 settings in the printer.