Lexmark M1246 Users Guide PDF - Page 97
Paper feed problems, Envelope seals when printing
View all Lexmark M1246 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Troubleshooting 97 All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable results if third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark printer or associated components. Warning-Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by the use of third-party supplies or parts may not be covered by the warranty. To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer, from the control panel, press and hold X and simultaneously for 15 seconds. If you do not want to accept these risks, then remove the third-party supply or part from your printer and install a genuine Lexmark supply or part. For more information, see "Using genuine Lexmark parts and supplies" on page 66. If the printer does not print after pressing and holding X and the supply usage counter. 1 From the control panel, navigate to: simultaneously for 15 seconds, then reset Settings > > Device > > Maintenance > > Config Menu > Counters > 2 Select the part or supply that you want to reset, and then select Start. 3 Read the warning message, and then select Continue. > Supply Usage And 4 Press and hold X and simultaneously for 15 seconds to clear the message. Note: If you are unable to reset the supply usage counters, then return the item to the place of purchase. Paper feed problems Envelope seals when printing Action Step 1 a Use an envelope that has been stored in a dry environment. Note: Printing on envelopes with high moisture content can seal the flaps. b Send the print job. Yes Go to step 2. Does the envelope seal when printing? No The problem is solved.