Lexmark M1246 Users Guide PDF - Page 95
Unable to read flash drive, Enabling the USB port, Settings, Network/Ports
View all Lexmark M1246 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Troubleshooting 95 Action Step 6 Check if the web proxy servers are disabled. Are the web proxy servers disabled? Step 7 Access the Embedded Web Server. Did the Embedded Web Server open? Yes Go to step 7. The problem is solved. Unable to read flash drive Action Step 1 Check if the printer is not busy processing another print, copy, scan, or fax job. Yes Go to step 2. Is the printer ready? Step 2 Check if the flash drive is inserted into the front USB port. Note: The flash drive does not work when it is inserted into the rear USB port. Go to step 3. Is the flash drive inserted into the correct port? Step 3 Check if the flash drive is supported. For more information, see "Supported flash drives and file types" on page 23. Go to step 4. Is the flash drive supported? Step 4 a Check if the USB port is enabled. For more information, see "Enabling the USB port" on page 95. b Remove, and then insert the flash drive. The problem is solved. Does the printer recognize the flash drive? Enabling the USB port 1 From the control panel, navigate to: > Settings > > Network/Ports > > USB > 2 Select Enable USB Port, and then press . No Contact your administrator. Contact customer support. No Wait for the printer to finish processing the other job. Insert the flash drive into the correct port. Insert a supported flash drive. Contact customer support.