Lexmark MS317 User Guide - Page 104
Timeouts, Notes, Error Recovery, Hibernate Timeout on Connection
View all Lexmark MS317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Understanding the printer menus Use Timeouts Hibernate Timeout on Connection Hibernate Do Not Hibernate Timeouts Screen Timeout 15-300 Timeouts Print Timeout Disabled 1-255 Timeouts Wait Timeout Disabled 15-65535 Error Recovery Auto Reboot Reboot when idle Reboot always Reboot never Max Auto Reboots 1-20 Print Recovery Auto Continue Disabled 5-255 Print Recovery Jam Recovery On Off Auto 104 To Set the printer to Hibernate mode even if there is an active Ethernet connection. Note: Do Not Hibernate is the factory default setting. Set the amount of time in seconds before returning the control panel to a Ready state. Note: 30 is the factory default setting. Set the amount of time in seconds the printer waits to receive an end‑of‑job message before canceling the rest of the job. Notes: • 90 is the factory default setting. • When the timer expires, any partially printed page still in the printer is printed, and then the printer checks to see if any new print jobs are waiting. • Print Timeout is available only when using PCL emulation. This setting has no effect on PostScript emulation print jobs. Set the amount of time in seconds the printer waits for additional data before canceling a print job. Note: 40 is the factory default setting. Set the printer to restart when an error occurs. Notes: • Reboot always is the factory default setting for Auto Reboot. • 2 is the factory default setting for Max Auto Reboots. Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period. Note: Disabled is the factory default setting. Specify whether the printer reprints jammed pages. Note: Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks.