Lexmark MS317 User Guide - Page 24
Connecting the printer to a wireless network using the Embedded Web Server, Verifying printer setup
View all Lexmark MS317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Additional printer setup 24 • Make sure a wireless network adapter is installed in your printer and is working properly. 1 From the Finder, navigate to: Applications > select your printer folder 2 Double‑click Wireless Setup Assistant, and then follow the instructions on the computer screen. Note: If you encounter problems while running the application, then click ? . Connecting the printer to a wireless network using the Embedded Web Server Before you begin, make sure that: • Your printer is connected temporarily to an Ethernet network. • A wireless network adapter is installed in your printer and working properly. For more information, see the instruction sheet that came with your wireless network adapter. 1 Open a Web browser, and then type the printer IP address in the address field. Notes: • View the printer IP address on the printer control panel. The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. • If you are using a proxy server, then temporarily disable it to load the Web page correctly. 2 Click Settings > Network/Ports > Wireless. 3 Modify the settings to match the settings of your access point (wireless router). Note: Make sure to enter the correct SSID. 4 Click Submit. 5 Turn off the printer, and then disconnect the Ethernet cable. Then wait for at least five seconds, and then turn the printer back on. 6 To verify if your printer is connected to the network, print a network setup page. Then in the Network Card [x] section, see if the status is Connected. Verifying printer setup MS312 and MS317 printing menu settings and network setup pages Printing a menu settings page Print a menu settings page to review the current menu settings and to verify if the printer options are installed correctly.