Lexmark MS317 User Guide - Page 191
Embedded Web Server does not open
View all Lexmark MS317 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Troubleshooting 191 Action Yes Step 1 a Print a font sample list to check if the fonts you are using are supported by the printer. 1 From the control panel, navigate to: Menus > Reports > Print Fonts 2 Select PCL Fonts or PostScript Fonts. b Resend the print job. Go to step 2. Are you using fonts that are supported by the printer? Step 2 The problem is Check if the fonts installed on the computer are supported by the solved. printer. Are the fonts installed on the computer supported by the printer? No Select a font that is supported by the printer. Contact customer support. Embedded Web Server does not open Action Step 1 a Turn on the printer. b Open a Web browser, and then type the printer IP address. c Press Enter. Yes The problem is solved. Does the Embedded Web Server open? Step 2 Make sure the printer IP address is correct. a View the printer IP address: • From the TCP/IP section in the Network/Ports menu • By printing a network setup page or menu settings page, and then finding the TCP/IP section The problem is solved. Note: An IP address appears as four sets of numbers separated by periods, such as 123.123.123.123. b Open a Web browser, and then type the IP address. Note: Depending on the network settings, you may need to type "https://" instead of "http://" before the printer IP address to access the Embedded Web Server. c Press Enter. Does the Embedded Web Server open? No Go to step 2. Go to step 3.