Lexmark MS331 Users Guide PDF - Page 52
Wireless Security Mode, WEP Authentication Mode, Set WEP Key, WPA2-Personal, Set PSK, WPA2/WPA,
View all Lexmark MS331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Use printer menus Menu item Wireless Security Mode Disabled* WEP WPA2/WPA-Personal WPA2-Personal 802.1x - RADIUS WEP Authentication Mode Auto* Open Shared Set WEP Key WPA2-Personal AES* Set PSK WPA2/WPA‑Personal AES* 802.1x Encryption Mode WPA+ WPA2* IPv4 Enable DHCP On* Off IPv4 Set Static IP Address IP Address Netmask Gateway IPv6 Enable IPv6 On* Off IPv6 Enable DHCPv6 Off* On 52 Description Set the type of security for connecting the printer to wireless devices. Set the type of Wireless Encryption Protocol (WEP) used by the printer. Note: This menu item appears only if Wireless Security Mode is set to WEP. Specify a WEP password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WEP. Enable wireless security through WPA2. Note: This menu item appears only if Wireless Security Mode is set to WPA2-Personal. Set the password for secure wireless connection. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal or WPA2‑Personal. Enable wireless security through WPA2/WPA. Note: This menu item appears only if Wireless Security Mode is set to WPA2/WPA-Personal. Enable wireless security through 802.1x standard. Note: This menu item appears only if Wireless Security Mode is set to 802.1x - Radius. Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information dynamically to clients. Set the static IP address of your printer. Enable IPv6 in the printer. Enable DHCPv6 in the printer.