Lexmark MS331 Users Guide PDF - Page 53
Ethernet, Network Address, PCL SmartSwitch, Mac Binary PS, Notes, Network Speed
View all Lexmark MS331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Use printer menus 53 Menu item IPv6 Stateless Address Autoconfiguration Off On* IPv6 DNS Address IPv6 Address Prefix 0-128 (64*) IPv6 All IPv6 Addresses IPv6 All IPv6 Router Addresses Network Address UAA LAA PCL SmartSwitch On* Off PS SmartSwitch On* Off Mac Binary PS Auto* On Off Description Set the network adapter to accept the automatic IPv6 address configuration entries provided by a router. Specify the DNS server address. Specify the address prefix. Show all IPv6 addresses. Show all IPv6 router addresses. View the network addresses. Set the printer to switch automatically to PCL emulation when a print job requires it, regardless of the default printer language. Note: If PCL SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to switch automatically to PS emulation when a print job requires it, regardless of the default printer language. Note: If PS SmartSwitch is off, then the printer does not examine incoming data and uses the default printer language specified in the Setup menu. Set the printer to process Macintosh binary PostScript print jobs. Notes: • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Ethernet Menu item Description Network Speed Show the speed of an active network adapter. IPv4 Enable DHCP On* Off Enable Dynamic Host Configuration Protocol (DHCP). Note: DHCP is a standard protocol that allows a server to distribute IP addressing and configuration information to clients in a dynamic manner. Note: An asterisk (*) next to a value indicates the factory default setting.