Lexmark MS331 Users Guide PDF - Page 56
SNMP, Outbound Traffic Maximum
View all Lexmark MS331 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Use printer menus 56 Menu item Description DDNS TTL Specify the current DDNS settings. Default TTL DDNS Refresh Time Enable mDNS On* Off Update multicast DNS settings. WINS Address Specify a server address for Windows Internet Name Service (WINS). Enable BOOTP Off* On Allow the BOOTP to assign a printer IP address. Restricted Server List Specify an IP address for the TCP connections. Notes: • This menu item appears only in the Embedded Web Server. • Use a comma to separate each IP address. • You can add up to 50 IP addresses. Restricted Server List Options Specify how the IP addresses in the list can access the printer functionality. Block All Ports* Block Printing Only Note: This menu item appears only in the Embedded Web Server. Block Printing and HTTP Only MTU Specify a maximum transmission unit (MTU) parameter for the TCP connections. Raw Print Port 1-65535 (9100*) Specify a raw port number for printers connected on a network. Outbound Traffic Maximum Speed Disabled* Enabled Enable the printer maximum transfer rate. Enable TLSv1.0 On* Off Enable the TLSv1.0 protocol. Enable TLSv1.1 On* Off Enable the TLSv1.1 protocol. SSL Cipher List Specify the cipher algorithms to use for the SSL or the TLS connections. Note: An asterisk (*) next to a value indicates the factory default setting. SNMP Note: This menu appears only in network printers or printers that are attached to print servers.