Lexmark MS622 Users Guide PDF - Page 160
Installing an internal solutions port
View all Lexmark MS622 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Upgrading and migrating 160 6 Attach the hard disk interface cable to the controller board. 7 Close the access cover. 8 Connect the power cord to the printer, and then to the electrical outlet. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. 9 Turn on the printer. Installing an internal solutions port CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. 1 Turn off the printer. 2 Unplug the power cord from the electrical outlet, and then from the printer. 3 Unpack the internal solutions port (ISP) kit. Note: Remove the preinstalled interface cable from the ISP. 1 ISP 2 Mounting bracket 3 Thumbscrews