Lexmark Optra T Service Manual - Page 130
Print Quality - Residual Image, photoconductor, cleaning blade and other parts inside the print
View all Lexmark Optra T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
4069-XXX Print Quality - Residual Image Service Tip: Install a new print cartridge if available before doing this service check. Residual image can be caused by the photoconductor, cleaning blade and other parts inside the print cartridge. FRU 1 Erase Lamp Assembly (models 010/212/414/616/) 2 Hot Roll Fuser Assembly Action Check the erase lamp lens assembly for any signs of paper dust, toner buildup or any other contamination. Clean with a soft cloth or replace the lens and lamp assembly which are provided together in a kit. If the lens is clean then check the erase lamp assembly for failed erase lamps. If defective, replace the erase lamp assembly. Check the fuser assembly for signs of toner contamination. The hot roll especially might cause toner to be retained and deposited on the page. 2-102 Service Manual