Lexmark Optra T Service Manual - Page 97
Operator Panel Service Check
View all Lexmark Optra T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
4069-XXX FRU 4 Motor does not turn, no gear error code 936 or User message 201 Paper Jam displays. Action Check the voltages at J12 on the engine board. Pin number and voltage: J12-1 = +24 V dc J12-4 = +5 V dc (static) 0 V dc (when main drive motor running) J12-5 = + 5 V dc (static) 0 V dc (when main drive motor running) J12-6 = +5 V dc (static) +2.5 V dc (when main drive motor running) J12-7 = +5 V dc (static) 0 V dc (when main drive motor running) J12-8 = +5 V dc (static) +5 V dc (when main drive motor running) J12-11 = + 5 V dc (static) 0 V dc (when main drive motor running) If the voltage is incorrect, replace the FRUs in the following order: main drive motor assembly engine board Operator Panel Service Check Operator Panel Buttons Service Check Note: Before continuing with this service check do the "Button Test" on page 3-9 in the diagnostic aids chapter. FRU 1 Operator Panel Assembly Action If any button fails the Button Test, replace the operator panel assembly. Diagnostic Information 2-69