Lexmark T520 User's Guide - Page 78
Loading print material, Print Timeout, Paper Type, Problem, Action
UPC - 734646620000
View all Lexmark T520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Problem Action Print material misfeeds or multiple feeds occur (continued). Make sure the paper width and length guides on the paper sources are adjusted correctly. Do not overfill the paper sources. Do not force print material into the multipurpose feeder when you load it; otherwise, it may skew or buckle. Remove any curled print material from paper sources. Load the recommended print side correctly for the type of print material you are using. See Loading print material for more information. Load less print material in the paper sources. Turn the print material over or around and try printing again to see if feeding improves. Do not mix print material types. Do not mix reams of print material. Remove the top and bottom sheets of a ream before loading the print material. Load a paper source only when it is empty. Envelope misfeeds or multiple feeds occur. Remove the stack of envelopes from the envelope feeder. Load one envelope, feed it through the printer, and then reload the stack of envelopes in the envelope feeder. Page breaks in unexpected places. Check the Print Timeout setting in the Setup Menu. Increase the setting. Job prints from the wrong paper Check the Paper Type setting in the Paper Menu from the printer operator source or on the wrong print panel and in the printer driver. material. Paper does not stack neatly in • Make sure the paper bail is installed. the output bin. • Turn the paper stack over in the tray or multipurpose feeder. Printer does not duplex pages. • Make sure Duplex is selected in both the Finishing Menu and in the printer driver. • Make sure you have enough printer memory installed. 76