Lexmark T650DN Service Manual - Page 105
sensor tamper HP left
UPC - 734646317344
View all Lexmark T650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
4062 Error code or message 27x.50 x = bin number Error contents Sensor (output pass through) lingering jam Applies to: Mailbox Description/Action Possible repair actions The media reached the sensor (output pass through) but did not clear it in the specified time. See "Sensor (output pass through) lingering jam service check" on page 2-151. 27x.50 x = bin number 27x.51 x = bin number 27x.51 x = bin number 271.52 x = bin number Left tamper does not leave home position failure Applies to: Offset stacker Sensor (output pass through) late jam Applies to: Mailbox Right tamper does not leave home position failure Applies to: Offset stacker Sensor (mailbox empty) lingering jam Applies to: Mailbox The sensor (left tamper HP) does not detect that the tamper has moved from home position. The media is late reaching the sensor (output pass through) within the specified time. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the left tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-180. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-187. 4. Replace the output option if problem remains. See "Sensor (output pass through) late jam service check" on page 2-150 The sensor (right tamper HP) does not detect that the tamper has moved from home position. The media reached the sensor (mailbox empty) but did not clear it in the specified time. 1. Check all the connections on the output option controller card. 2. Check the tamper drive belt for damage and replace if needed. 3. Replace the right tamper motor assembly. Go to "SFP stapler assembly tamper drive motor assembly removal" on page 4-180. 4. Replace the sensor (tamper HP). Go to "SFP stapler assembly sensor (tamper HP left and right) removal" on page 4-187. 4. Replace the output option if problem remains. See "Sensor (mailbox empty) lingering jam service check" on page 2-154. Diagnostic information 2-71