Lexmark T650DN Service Manual - Page 116
then reinstall the stapler, If problem remains, replace
UPC - 734646317344
View all Lexmark T650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
4062 Error code or message 28x.69 x = bin number Error contents Staple ready home position jam Applies to: StapleSmart finisher 28x.70 x = bin number Stapler mechanism not in home position failure Applies to: StapleSmart finisher Description/Action Possible repair actions The sensor (self priming) within the stapler assembly does not detect a ready staple in the specified time after the staple job was sent. Staples not empty The sensor (home signal) within the stapler assembly detected that the stapler mechanism was not in the home position before stapling. 1. Check all the connections on the controller card and the stapler assembly. 2. Remove the staple cartridge and remove all jammed staples. If the cartridge is jammed and can not be removed, go to step 3. 3. Remove the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 4. Manually rotate the drive gears and reset the stapler. Remove all jammed staples then reinstall the stapler assembly. 5. If problem remains, replace the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 1. Check all the connections on the controller card and the stapler assembly. 2. Remove the staple cartridge and remove all jammed staples. If the cartridge is jammed and can not be removed, go to step 3. 3. Remove the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 4. Manually rotate the drive gears and reset the stapler and remove all jammed staples then reinstall the stapler assembly. 5. If problem remains, replace the stapler assembly. Go to "SFP stapler assembly stapler unit assembly removal" on page 4-182. 2-82 Service Manual