Lexmark T650DN Service Manual - Page 54
Error, code or, message, Error contents, Description/Action, Possible repair actions
UPC - 734646317344
View all Lexmark T650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4062 Error code or message 201.26 Error contents Main drive motor assembly load error. Type 2 fuser 201.27 Sensor (fuser output) late jam. Type 2 fuser 201.28 Image data did not start in time Type 2 fuser 201.29 Sensor (narrow media) late jam Type 2 fuser 201.30 Operator panel door assembly interlock switch failure Type 2 fuser 201.31 Sensor (narrow media) late jam Type 2 fuser Description/Action Possible repair actions The main drive motor assembly has failed or caused high mechanical load due to paper jam or bind. The media is late reaching the sensor (fuser output) within the specified time. Printhead write failure The expected wide media is late reaching the sensor (narrow media) within the specified time. The printer detected that the operator panel door interlock switch did not cycle prior to printer restart. The expected wide media is late reaching the sensor (narrow media) within the specified time. 1. Check all connections on the main drive motor assembly. 2. Check all connections on the system card assembly. 3. Replace the main drive motor assembly if problem remains. Go to "Output cover assembly removal (T650, T652, T654)" on page 4-54. Go to sensor (fuser output) late jam service check. See "Sensor (fuser output) late jam service check." on page 2-135. If problem remains, a type 2 fuser can be installed. 1. Check all connections on the printhead assembly 2. Check all connections on the system card assembly. 3. Replace the printhead assembly if problem remains. 4. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-139. 1. Remove all media present in media path. 2. Ensure that the operator panel door assembly is fully open then fully closed. 3. Check operator panel door assembly for damage. 4. Check interlock switch (in left operator panel hinge) for damage. 5. Check all connections on the system card assembly. Go to sensor (narrow media) late jam service check. See "Sensor (narrow media) late jam service check." on page 2-139. 2-20 Service Manual