Lexmark X364dn User's Guide - Page 124
Run Initial setup, Paper Sizes, Scan to PC Port Range, Default Mode, Date Format, Time Format,
View all Lexmark X364dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Menu item Run Initial setup Yes No Paper Sizes U.S. Metric Scan to PC Port Range Default Mode Copy Fax Date Format MM-DD-YYYY DD-MM-YYYY YYYY-MM-DD Time Format 12 hour A.M./P.M. 24 hour clock Alarms Alarm Control Cartridge Alarm Timeouts Power Saver Disabled 1-240 Timeouts Screen Timeout 15-300 Description Instructs the printer to run the setup wizard Notes: • Yes is the factory default setting. • After completing the setup wizard by selecting Done at the Country select screen, the default setting becomes No. Specifies the printer factory default measurements. The default setting is determined by the country selection in the initial setup wizard. Specifies a valid port range for printers behind a port blocking firewall. The valid ports are specified by two sets of numbers separated by a semicolon. Note: 9751:12000 is the factory default setting. Sets the function the printer enters when Go, Content, Darkness, or any number is pressed on the printer control panel Note: Copy is the factory default setting Formats the printer date Note: MM-DD-YYYY is the US factory default setting and DD-MM-YYYY is the international factory default setting. Formats the printer time Note: The factory default setting is 12 hour A.M./P.M. Sets an alarm to sound when the printer requires operator intervention. Available selections for each alarm type are: Off Single Continuous Notes: • Single is the factory default setting for Alarm Control. Single sounds three quick beeps. • Off means no alarm will sound. • Continuous repeats three beeps every 10 seconds. Specifies the number of minutes of inactivity before some systems begin entering a minimum power state. Note: 30 minutes is the factory default setting. Sets the amount of time in seconds the printer waits before returning the printer display to a Ready state Note: 30 seconds is the factory default setting. Understanding printer menus 124