Lexmark X364dn User's Guide - Page 29
Installing the printer on a wireless network (Macintosh), Suggested, Wireless Network Attach, Notes
View all Lexmark X364dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
5 Select Suggested and then click Next. 6 Click Wireless Network Attach. 7 Remove the label covering the USB port on the back of the printer. 8 Temporarily connect a USB cable between the computer on the wireless network and the printer. Notes: • After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you can print wirelessly. • If your printer has faxing capabilities, then connect the telephone cable. 9 Follow the on-screen instructions to complete the software installation. Note: Basic is the recommended path to choose. Choose Advanced only if you want to customize your installation. 10 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 for each computer. Installing the printer on a wireless network (Macintosh) Before you install the printer on a wireless network, make sure that: • Your wireless network is set up and working properly. • The computer you are using is connected to the same wireless network where you want to set up the printer. Additional printer setup 29