Lexmark X945 Maintenance Manual - Page 14
Replacing a photoconductor, Replace black pc unit
![]() |
View all Lexmark X945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
11 Close Door E. Replacing a photoconductor Replace the black photoconductor when 84 Replace black pc unit appears. Replace the cyan, magenta, and yellow photoconductors when 84 Replace color pc units appears. 1 Open Door E (front printer door). Warning-Potential Damage: To avoid overexposing the photoconductors, do not leave the door open for more than 10 minutes. 2 Release the bar by pressing the E5 button located on the bottom of the E5 latch, lift the E5 latch, and then press the bar down. Maintaining the printer 14
![](/manual_guide/products/lexmark-x945-maintenance-manual-03d40ac/14.png)
11
Close Door E.
Replacing a photoconductor
Replace the black photoconductor when
84 Replace black pc unit
appears. Replace the cyan, magenta, and
yellow photoconductors when
84 Replace color pc units
appears.
1
Open Door E (front printer door).
Warning—Potential Damage:
To avoid overexposing the photoconductors, do not leave the door open for more
than 10 minutes.
2
Release the bar by pressing the E5 button located on the bottom of the E5 latch, lift the E5 latch, and then press
the bar down.
Maintaining the printer
14