Lexmark XM5270 User Guide - Page 164
NPA Mode, Notes, USB Buffer, Job Buffering, Mac Binary PS, ENA Address, ENA Netmask
View all Lexmark XM5270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Understanding the printer menus 164 Use To NPA Mode On Off Auto Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately. • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated. USB Buffer Disabled Auto 3K to [maximum size allowed] Set the size of the USB input buffer. Notes: • Auto is the factory default setting. • Disabled turns off job buffering. Any jobs already buffered on the printer hard disk are printed before normal processing resumes. • The USB buffer size value can be changed in 1-K increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for the USB Buffer, disable or reduce the size of the parallel, serial, and network buffers. • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated. Job Buffering Off On Auto Temporarily store print jobs in the printer hard disk before printing. Notes: • Off is the factory default setting. • On buffers jobs on the printer hard disk. • Auto buffers print jobs only if the printer is busy processing data from another input port. • Changing this setting from the printer control panel and then exiting the menus causes the printer to restart. The menu selection is then updated. Mac Binary PS On Off Auto Set the printer to process Macintosh binary PostScript print jobs. Notes: • Auto is the factory default setting. • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. ENA Address yyy.yyy.yyy.yyy Set the network address information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. ENA Netmask yyy.yyy.yyy.yyy Set the netmask information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port.