Lexmark XM5270 User Guide - Page 319
Poor copy quality, Step 1, Advanced Options, Advanced Imaging, Sharpness
View all Lexmark XM5270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 319 highlights
Troubleshooting 319 Poor copy quality Action Step 1 Check if an error or status message appears on the display. Yes Clear the error or status message. No Go to step 2. Does an error or status message appear? Step 2 Check the quality of the original document. Go to step 3. Is the quality of the original document satisfactory? Step 3 Go to step 4. If dark marks appear on prints, then clean the scanner glass and the ADF glass using a clean, lint-free cloth dampened with water. Increase the scan resolution setting for a higher‑quality output. See "Cleaning the scanner glass" on page 237. Is the scanner glass clean? Step 4 Go to step 5. Send a print job, and then check for print quality problems. a From the General Settings menu, adjust the Eco‑Mode settings. b From the Copy menu, adjust the Darkness setting. c If the print remains faded, then replace the toner cartridge. See "Print quality problems" on page 298. Is the print quality satisfactory? Step 5 Go to step 6. Check the placement of the document or photo. Make sure the document or photo is loaded facedown on the scanner glass in the upper left corner. Is the document or photo loaded correctly? Step 6 Go to step 7. Check the copy settings. From the Copy screen, check if the Content Type and Content Source settings are correct for the document being scanned. Are the Content Type and Content Source settings correct for the document being scanned? Step 7 Go to step 8. Check for patterns on prints. a From the Copy screen, navigate to: Advanced Options > Advanced Imaging > Sharpness > select a lower setting Note: Make sure no scaling is being selected. b Resend the copy job. Place the document or photo facedown on the scanner glass in the upper left corner. Change the Content Type and Content Source settings to match the document being scanned. The problem is solved. Do patterns appear on prints?