Lexmark XM5270 User Guide - Page 194

Understanding the printer menus 194 Use Background Removal ‑4 to 4 Color Balance Cyan - Red Magenta - Green Yellow - Blue Color Dropout Color Dropout None Red Green Blue Default Red Threshold 0-255 Default Green Threshold 0-255 Default Blue Threshold 0-255 Contrast 0-5 Best for content Mirror Image Off On Negative Image Off On Shadow Detail ‑4 to 4 ADF Multi‑feed Sensor On Off Scan edge to edge Off On Sharpness 1-5 Temperature ‑4 to 4 To Adjust the amount of background visible on a scanned image. Note: 0 is the factory default setting. Enable an equal balance of colors in the scanned image. Specify which color to drop and to adjust the dropout setting for each color threshold. Notes: • None is the factory default setting for Color Dropout. • 128 is the factory default setting for each color threshold. Specify the contrast in the scanned image. Note: Best for content is the factory default setting. Create a mirror image of the original document. Note: Off is the factory default setting. Create a negative image of the original document. Note: Off is the factory default setting. Adjust the amount of shadow detail visible. Note: 0 is the factory default setting. Detect when the ADF picks more than one sheet of paper at once. Note: On is the factory default setting. Specify whether the original document is scanned edge-to-edge. Note: Off is the factory default setting. Adjust the sharpness of a fax. Note: 3 is the factory default setting. Specify warm or cool outputs. Cool values generate a bluer output than the default while warm values generate a redder output than the default. Note: 0 is the factory default setting.