Lexmark XM5270 User Guide - Page 274

Troubleshooting 274 Maintenance kit nearly low [80.xy] For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, touch Continue to clear the message and continue printing. Maintenance kit very low, [x] estimated pages remain [80.xy] You may need to replace the maintenance kit very soon. For more information, visit the Lexmark support Web site at http://support.lexmark.com or contact customer support, and then report the message. If necessary, touch Continue to clear the message and continue printing. Memory full [38] Try one or more of the following: • From the printer control panel, touch Cancel job to clear the message. • Install additional printer memory. Memory full, cannot print faxes From the control panel, do either of the following: • Touch Continue holding faxes without printing to clear the message. • Touch Attempt to print to restart the printer and continue printing. Misfeed cleared, extra sheets in output bin [24y.xx] Select Continue on the printer control panel to clear the message and continue printing. Note: To reduce misfeeds, make sure that media is fanned and loaded properly. Network [x] software error [54] Try one or more of the following: • From the printer control panel, touch Continue to continue printing. • Turn off the printer, wait for about 10 seconds, and then turn the printer back on. • Update the network firmware in the printer or print server. For more information, visit the Lexmark support Web site at http://support.lexmark.com. No analog phone line connected to modem, fax is disabled. Connect the printer to an analog phone line. Non‑Lexmark [supply type], see User's Guide [33.xy] Note: The supply type can be toner cartridge or imaging unit.