Lexmark XM7263 User Guide - Page 88
Storing paper, Supported paper sizes, types, and weights, Paper sizes supported by the printer
View all Lexmark XM7263 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Paper and specialty media guide 88 For more information about Lexmark, visit www.lexmark.com. General sustainability-related information can be found at the Environmental Sustainability link. Storing paper Use these paper storage guidelines to help avoid jams and uneven print quality: • For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40 percent. Most label manufacturers recommend printing in a temperature range of 18-24°C (65-75°F) with relative humidity between 40 and 60 percent. • Store paper in cartons, on a pallet or shelf, rather than on the floor. • Store individual packages on a flat surface. • Do not store anything on top of individual paper packages. • Take paper out of the carton or wrapper only when you are ready to load it in the printer. The carton and wrapper help keep the paper clean, dry, and flat. Supported paper sizes, types, and weights The following tables provide information on standard and optional paper sources and the sizes, types, and weights of paper they support. Note: For an unlisted paper size, select the closest larger listed size. Paper sizes supported by the printer Note: When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed after a period of time to ensure the best print performance. Paper size1 Dimensions 550‑sheet tray 2100‑sheet tray Multipurpose Duplex ADF feeder Scanner glass A4 210 x 297 mm (8.3 x 11.7 in.) A5 148 x 210 mm 2 (5.8 x 8.3 in.) A6 105 x 148 mm (4.1 x 5.8 in.) X JIS B5 182 x 257 mm (7.2 x 10.1 in.) X Letter 216 x 279 mm (8.5 x 11 in.) 1 If your preferred default paper size cannot be set in the printer control panel, then you may select common paper sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper size is not available, then select Universal or turn off tray size sensing. For more information, contact customer support. 2 Paper is supported in long‑edge orientation. 3 Universal is supported in ADF only if the width is from 76 mm (3 in.) to 216 mm (8.5 in.), and the length is from 127 mm (5 in.) to 356 mm (14 in.).