Lexmark XM9145 User's Guide - Page 154

Understanding the printer menus Use Timeouts Standby Mode Disabled 1-240 Timeouts Sleep Mode Disabled 1-120 Timeouts Print with Display off Allow printing with display off Display on when printing Timeouts Hibernate Timeout Disabled 1 hour 2 hours 3 hours 6 hours 1 day 2 days 3 days 1 week 2 weeks 1 month Timeouts Hibernate Timeout on Connection Do Not Hibernate Hibernate Timeouts Screen Timeout 15-300 Timeouts Prolong Screen Timeout On Off 154 To Specify the number of minutes of inactivity before the printer enters a lower power state. Note: 15 is the factory default setting. Set the amount of time in minutes the printer waits after a job is printed before it goes into a reduced power state. Notes: • 20 is the factory default setting. • Disabled appears only when Energy Conserve is set to Off. • Lower settings conserve more energy, but may require longer warm‑up times. • Select a high setting if the printer is in constant use. Under most circumstances, this keeps the printer ready to print with minimum warm‑up time. Allow the printer to print even when the display is off. Note: Allow printing with display off is the factory default setting. Set the amount of time before the printer enters Hibernate mode. Note: 3 days is the factory default setting. Set the printer to Hibernate Timeout even when there is an active Ethernet connection. Note: Hibernate is the factory default setting. Set the amount of time in seconds the printer waits before returning to Ready state. Note: 30 is the factory default setting. Set the printer to continue a specified job without returning to the home screen when the screen timeout timer expires. Note: Off is the factory default setting.