Lexmark XM9145 User's Guide - Page 275

Troubleshooting 275 Insert hole punch box Insert the hole punch box into the finisher, and then touch Continue to clear the message. Insert Tray [x] Try one or more of the following: • Insert the specified tray into the printer. • Cancel the print job. • Reset the active bin for a linked set of bins by selecting Reset active bin on the printer control panel. Insufficient memory for Flash Memory Defragment operation [37] Try one or more of the following: • From the printer control panel, touch Continue to stop the defragmentation and continue printing. • Delete fonts, macros, and other data in the printer memory. • Install additional printer memory. Insufficient memory to collate job [37] Try one or more of the following: • From the printer control panel, touch Continue to print the part of the job already stored and begin collating the rest of the print job. • Cancel the current print job. Insufficient memory to support Resource Save feature [35] Install additional printer memory or touch Continue to disable Resource Save, clear the message, and continue printing. Insufficient memory, some Held Jobs were deleted [37] From the printer control panel, touch Continue to clear the message. Insufficient memory, some held jobs will not be restored [37] Try one or more of the following: • From the printer control panel, touch Continue to clear the message. • Delete other held jobs to free up additional printer memory. Insufficient space between paper stacks in Tray 3 Move the paper stacks apart, and then touch Continue on the control panel to clear the message and continue printing.