Lexmark Z11 Color Jetprinter User Guide - Page 37
Appendix - download
View all Lexmark Z11 Color Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Appendix In this section, you can find information about: • Installing the printer software • Printing from Windows 3.1 or 3.11 • Printing from DOS • Statement of Limited Warranty • Notices • Safety information Installing the printer software You can obtain the printer software from the CD-ROM, diskettes, or World Wide Web. Using the CD-ROM If your computer has a CD-ROM drive, follow the steps in the Getting Started booklet to install your printer software. If your computer does not have a CD-ROM drive, you can create driver diskettes using another computer with a CD-ROM drive. Using diskettes If your computer does not have a CD-ROM drive, ask our Customer Support Center to mail you diskettes. Refer to the printer registration card for the number in your country. Follow the instructions for your operating system to install the printer software from diskettes. Windows 95 or 98 IMPORTANT: If Windows displays a message indicating your printer has been found, select Cancel. If the update Device Driver Wizard appears, select Cancel. 1 Make sure your computer is on and Windows is running. 2 Start Windows. 3 Insert Setup Disk 1 into your disk drive. 4 From the Start menu, choose Run. 5 In the command-line text box, type the letter of your disk drive, followed by :\setup (for example, a:\setup), and then click OK. 6 When prompted by the printer software, insert the appropriate disks into your disk drive and click OK. 7 Follow the instructions on the screen. Windows 3.1 or 3.11 1 Make sure your computer is on and Windows is running. 2 Insert Setup Disk 1 into your disk drive. 3 From the Windows Program Manager menu bar, choose File, and then choose Run. 4 In the command-line text box, type the letter of your disk drive, followed by :\setup (for example, a:\setup), and then click OK. 5 When prompted by the printer software, insert the appropriate disks into your disk drive and click OK. 6 Follow the instructions on the screen. Using a downloaded printer driver If your computer does not have a CD-ROM drive, you can download a driver from Lexmark's World Wide Web site. 1 From Lexmark's web page, select the appropriate driver for your operating system. 2 Select Save to Disk. 3 Select a location on your hard disk drive. 4 Double-click the executable (.exe) file to open it. The WinZip Self-Extractor window opens. 5 Follow the instructions on your screen. Printing from Windows 3.1 or 3.11 When you installed the software for your printer, several applications were installed on your computer. The printer software applications allow you to perform printing tasks with the Appendix 33