Lexmark Z55 Color Jetprinter User's Guide - Page 19

The alignment did not print., The paper feed light is, blinking., A communications error

Page 19 highlights

The alignment page did not print. Make sure: • You completely removed the sticker and transparent tape from the back and bottom of both print cartridges. • You installed the black cartridge (P/N 82) in the left carrier and the color cartridge (P/N 83 or 88) in the right carrier. • You loaded plain A4 or letter size paper into the paper support (see page 5). • You loaded the paper correctly and did not push it too far into the printer (see page 5). • For more information, follow the instructions for your operating system. Windows Macintosh If there is an error message on your screen, follow the instructions on it. For additional help, see page 4. Refer to the Troubleshooting topic for this problem in the Online User's Guide (see page 3). The paper feed light is blinking. A communications error message appeared. • Your printer may be out of paper or the paper is jammed. Make sure you loaded the paper correctly. For help, see page 5. • If there is an error message on your screen, follow the instructions on it. • For more help, see page 4. First, see if checking the items on page 11 solves the problem. If the printer software does not install properly, a communications error message appears when you try to print. You may need to uninstall, and then reinstall the printer software. For help: • See page 21 for Windows. • See page 22 for Macintosh. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

17
Make sure:
You completely removed the sticker and transparent tape from the back and bottom of
both print cartridges.
You installed the black cartridge (P/N 82) in the left carrier and the color cartridge
(P/N 83 or 88) in the right carrier.
You loaded plain A4 or letter size paper into the paper support (see page 5).
You loaded the paper correctly and did not push it too far into the printer (see page 5).
For more information, follow the instructions for your operating system.
Windows
Macintosh
If there is an error message on
your screen, follow the instructions
on it. For additional help, see
page 4.
Refer to the Troubleshooting topic
for this problem in the
Online
User’s Guide
(see page 3).
The alignment page
did not print.
If the printer software does not install
properly, a communications error
message appears when you try to print.
You may need to uninstall, and then
reinstall the printer software. For help:
See page 21 for Windows.
See page 22 for Macintosh.
First, see if checking the items on
page 11 solves the problem.
Your printer may be out of paper or
the paper is jammed. Make sure you
loaded the paper correctly. For help,
see page 5.
If there is an error message on your
screen, follow the instructions on it.
For more help, see page 4.
The paper feed light is
blinking.
A communications error
message appeared.