LiftMaster 8010 8010 Owner s Manual - Page 15
Connect the Door Arm to the Trolley, IMPORTANT
View all LiftMaster 8010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Installation 9 Connect the Door Arm to the Trolley IMPORTANT: The groove on the straight door arm MUST face away from the curved door arm. 1. Close the door. Disconnect the trolley by pulling the emergency release handle. 2. Attach the straight door arm to the outer trolley using the clevis pin. Secure with the ring fastener. 3. Attach the curved door arm to the door bracket using the clevis pin. Secure with the ring fastener. 4. Bring arm sections together. Find two pairs of holes that line up and join sections. Select holes as far apart as possible to increase door arm rigidity and attach using the bolts and nuts. 5. Pull the emergency release handle toward the garage door opener until the trolley release arm is horizontal. The trolley will re-engage automatically when the garage door opener is activated. HARDWARE Clevis Pin 5/16"x1-1/4" Clevis Pin 5/16"x1" Hex Bolt 1/4"-20x3/4" Ring Fastener Lock Nut 1/4"-20 CORRECT Straight Door Arm (Groove facing out) Curved Door Arm INCORRECT Straight Door Arm Curved Door Arm Ring Fastener Lock Nut 1/4"-20 Clevis Pin 5/16"x1" Hex Bolt 1/4"-20x3/4" Clevis Pin 1/4"x1-1/4" 15