Home » LiftMaster Manuals » Garage Door Openers » LiftMaster 8160W » Manual Viewer

LiftMaster 8160W Owners Manual - Page 1

LiftMaster 8160W Manual

Add to My Manuals
Save this manual to your list of manuals

Page 1 highlights

Wi-Fi® Garage Door Opener Contractor Series Chain Drive Models 8160W, 8160WB, 8164W, and 8165W Contractor Series Belt Drive Model 8155W FOR RESIDENTIAL USE ONLY • Please read this manual and the safety materials carefully! • The door WILL NOT CLOSE unless the Protector System® is connected and properly aligned. • Periodic checks of the garage door opener are required to ensure safe operation. • This garage door opener is ONLY compatible with myQ® and Security+ 2.0® accessories. • DO NOT install on a one-piece door if using devices or features providing unattended close. Unattended devices and features are to be used ONLY with sectional doors. • Attach warning labels to the location indicated on label. Register your garage door opener to receive updates and offers from LiftMaster Take a photo of the camera icon including the points ( ). Send it in by texting the photo to 71403 (US) or visit www.liftmaster.photo (Global) LiftMaster 300 Windsor Drive Oak Brook, IL 60523

Section	Page
Contractor Series Chain Drive Models 8160W, 8160WB, 8164W, and 8165W Contractor Series Belt Drive Model 8155W	1
Contents	2
Preparation	3
myQ Serial Number	3
Safety Symbol and Signal Word Review	3
Unattended Operation	3
Before You Connect with Your Smartphone	4
Check the Door	4
Tools Needed	5
Carton Inventory - 8160W, 8160WB, 8164W, 8165W	6
Carton Inventory - 8155W	7
Assembly for Models: 8160W, 8160WB, 8164W, 8165W	8
1 Attach the Rail to the Garage Door Opener	8
2 Tighten the Chain	8
Assembly for Model: 8155W	9
1 Attach the Rail to the Garage Door Opener	9
2 Tighten the Belt	9
Installation	11
1 Determine the Header Bracket Location	11
2 Install the Header Bracket	12
3 Attach the Rail to the Header Bracket	13
4 Position the Garage Door Opener	13
5 Hang the Garage Door Opener	14
6 Install the Light Bulbs for Models 8160W, 8160WB	15
Install the Light Bulbs for Models 8155W, 8164W and 8165W	15
7 Attach the Emergency Release Rope and Handle	16
8 Install the Door Bracket	17
9 Connect the Door Arm to the Trolley	18
Install the Door Control	19
1 Install the Door Control - 882LMW	19
1 Install the Door Control - 883LMW	20
2 Wire the door control to the garage door opener	21
3 Attach the warning labels	21
Install the Protector System®	22
Introduction	22
1 Install the Safety Reversing Sensors	23
2 Wire the Safety Reversing Sensors	24
Power	26
1 Connect Power	26
2 Ensure the Safety Reversing Sensors are Aligned	27
3 Ensure the Door Control is Wired Correctly	28
Adjustments	29
Introduction	29
1 Program the Travel	30
2 Test the Safety Reversal System	31
3 Test the Protector System®	31
Battery Backup	32
1 Install the Battery*	32
2 Test the Battery	32
3 Charge the Battery*	33
4 Battery Status LED	33
Operation	35
Features	35
Connect With Your Smartphone	36
Using the Multi-Function Door Control 882LMW	37
Using the Push Button Door Control 883LMW	38
Control Panel Setup	39
Remote Control	40
To Erase the Memory	41
To Open the Door Manually	41
Maintenance	42
Maintenance Schedule	42
The Remote Control Battery	42
Troubleshooting	43
Diagnostic Chart	43
Accessories	45
Warranty	46
Automatic Garage Door Opener Safety & Maintenance Guide	47
Repair Parts	49
Models 8160W, 8160WB, 8164W and 8165W	49
Model 8155W	50
Model 8155W	51
Model 8160W and 8160WB	52