LiftMaster 8550 8550 Manual - Page 31

Door Control MENU NAVIGATION The features on the door control can be programmed through a series of menus on the screen and the navigation buttons. Refer to the descriptions below. SCREEN The main screen displays the time, temperature, and current battery charge (if applicable). FEATURES Press the navigation button below "MENU" to view the Features menu. SETTINGS Press the navigation button below the down arrow till you see TEMPERATURE to view the Settings menu. SERVICE Press and hold the second navigation button, then press the LIGHT button to view the Service menu. Navigation Buttons CLOCK SETUP: Set the time, choose 12 or 24 hour clock and show/hide clock. TTC SETTINGS (for sectional doors ONLY): Set the Timer-to-Close feature off/on and set the time interval before door closes. NOTE: DO NOT enable TTC if operating a one-piece door. TTC is to be used ONLY with sectional doors. LOCK: Enable/disable lock. TEMPERATURE: Display the temperature in Fahrenheit or Celsius and show/hide the temperature. LANGUAGE: Select a language. SOFTWARE REVISION: Displays software version information. CYCLE COUNT ON/OFF: Turn the Maintenance Alert (MAS) on/off. LIGHT SETTINGS: Set duration for garage door opener light to stay on after operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn the Motion sensor off/on, and turn the entry light feature off/on. TRANSMITTERS: Displays the number of remote controls, MyQ™ devices, door controls and keyless entries currently programmed to operate the garage door opener. PROGRAM: Add remote controls, MyQ™ devices, an extra remote button to control your garage door CONTRAST: Adjust the contrast of the screen. opener lights, or a keyless entry. DISPLAY ERROR: Displays any errors that have occurred. To program a remote control or keyless entry to the garage door opener using the door control see page 32. 31