LiftMaster T T- Mechanical New style with thermal overload Manual - Page 2
Specifications, Motor, Mechanical, Safety, Electrical, Weights And Dimensions - transformer
View all LiftMaster T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
SPECIFICATIONS MOTOR TYPE Continuous duty HORSEPOWER 1/3, 1/2, 3/4 & 1 Hp Single or Three phase SPEED 1725 RPM VOLTAGE 115, 220, 230 Single phase 230, 460, 575 Three phase CURRENT See motor nameplate ELECTRICAL TRANSFORMER 24VAC CONTROL STATION: ......NEMA 1 three button station. OPEN/CLOSE/STOP WIRING TYPE C2 (Factory Shipped) Momentary contact to OPEN & STOP, constant pressure to CLOSE, open override plus wiring for sensing device to reverse. See page 8 for optional control settings. LIMIT ADJUST Linear driven, fully adjustable screw type cams. Adjustable to 24 feet. MECHANICAL DRIVE REDUCTION Primary: Heavy duty (5L) V-Belt. Secondary: #41 chain/sprocket. Output: #48 chain (1/3 &1/2Hp) or #41 chain (3/4 &1Hp) OUTPUT SHAFT SPEED:.....140 R.P.M. DOOR SPEED 11" - 12" per sec. depending on door BRAKE Solenoid actuated disc brake on 3/4 & 1Hp BEARINGS Output Shaft: Shielded Ball Bearing. Clutch Shaft: IronCopper sintered and oil impregnated. SAFETY DISCONNECT Quick disconnect door arm for emergency manual door operation. REVERSING EDGE: ....(Optional) Electric or pneumatic sensing device attached to the bottom edge of door. A REVERSING EDGE IS STRONGLY RECOMMENDED FOR ALL COMMERCIAL OPERATOR INSTALLATIONS. REQUIRED WHEN THE 3 BUTTON CONTROL STATION IS OUT OF SIGHT OF DOOR OR ANY OTHER CONTROL (AUTOMATIC OR MANUAL) IS USED. WEIGHTS AND DIMENSIONS HANGING WEIGHT: .........80-110 LBS. 13-1/8" * Door Height Plus 4 feet (minimum) 4" Highest Point of Door Travel 10-1/2" *20-1/2" * For Units with Brake add 3-1/2" (Standard on 3/4 & 1HP models Optional on 1/3 & 1/2HP) 2