Linksys EFG80 User Guide - Page 19

Instant GigaDriveTMSeries Format Disk If you have installed a new hard drive into the GigaDrive's expansion slot, you will need to format the hard drive with the new format utility. Click Format Disk to format the hard drive. Self-Test This test tells you the condition of the hard drive. Your hard drive must support S.M.A.R. T. to run the test. Click on Test Now if you want to run the test immediately. In Run Test:, select the time and frequency that you want to run the test. Scandisk This checks your hard drive for directory structure, available space, and overall condition of files. Defrag This checks your hard drive for fragmented files. Run this test to Defrag your hard drive. Standby Select the amount of time that you want your hard drive to wait before going into standby mode. Click on the Save button to save any changes you have made to Properties. Click on theCancel button to clear all changes. Click on the Disk Log to see the log of your disk settings. Click on the Help button to get more information. Etherfast Network Attached Storage Administration Tab - Upgrade Figure 5-15 The Upgrade screen allows you to upgrade the Firmware to your Gigadrive. Current Firmware This shows you the current version of the firmware that is on your Gigadrive. Click on Check for Update to browse for the latest version of firmware. Upgrade Click on the Browse button to browse for the latest version of firmware, then click on Start Upgrade. Click on the Help button to get more information. 32 33