Linksys EFG80 User Guide - Page 8

Instant GigaDriveTMSeries This Welcome screen provides you with four options in the buttons along the right side of the screen. The first button is the Setup button. Click this button to continue with the setup procedure. The second button is the User Guide button. The third button, Linksys Web, connects you to the Linksys web site if you have an active Internet connection. Lastly, clicking the Exit button will exit the Setup Wizard. The remainder of this chapter addresses the setup procedure you would follow by clicking the Setup button. 3. The following screen, shown in Figure 4-2, will search for any Instant GigaDrives currently on your network or attached to your PC. The Setup Wizard will automatically search for an Instant GigaDrive™ when this screen apears. If it fails to detect the Instant GigaDrive™ or if an Instant GigaDrive™ has been installed since the Setup Wizard's last search, click Search Again to locate the GigaDrive. Etherfast Network Attached Storage When an Instant GigaDrive™ has been found by the Setup Wizard, you can create a shortcut on your desktop for quicker access to that Instant GigaDrive™. The shortcut appears as shown in Figure 4-3. From the screen shown in Figure 4-2, once you have found the Instant GigaDrive™ you wish to set up, highlight and click on it, click the Yes button on the Figure 4-3 right to change any of the Instant GigaDrive's settings (as shown in Figure 4-4) or the No button to accept the settings and close the Setup Wizard. Figure 4-2 10 Figure 4-4 4. The first settings that you can change are the Instant GigaDrive's IP Address settings. As shown in Figure 4-5, select the radio button beside either Fixed IP Address or Dynamic IP Address. 11