Linksys EFG80 User Guide - Page 4

Package Contents Instant GigaDriveTMSeries The following items should be included in the Instant GigaDrive's packaging. If any of these items are damaged or missing, please contact your Linksys dealer for replacements. • One Linksys Instant GigaDrive™ • One Power Cord • One Ethernet Network Cable • One Setup Wizard CD-ROM • One User Guide • One Quick Installation and Registration Card Minimum Requirements • Windows 98, NT 4.0, 2000, Millennium, or XP • 10BaseT or 100BaseTX Ethernet network • TCP/IP protocol installed Disclaimer: Linksys highly recommends that you regularly back up the files that are on the Instant GigaDrive™ . Linksys is not responsible for any data loss, nor will Linksys perform any recovery on lost data or files. 2 Etherfast Network Attached Storage Chapter 2: Getting to Know the Instant GigaDrive™ The Instant GigaDrive's Rear Panel All of the Instant GigaDrive's connectors and switches are on the rear panel, as shown in Figure 2-1. Power Switch Figure 2-1 The Power switch is a spring-loaded soft switch that powers the Instant GigaDrive™ on and off. If the Instant GigaDrive™ is not powered on, pressing the Power switch will start the Instant GigaDrive's start-up process. Pressing the Power switch while the Instant GigaDrive™ is turned on will begin it's internal shut-down process. The Instant GigaDrive™ must be powered off this way, or through its internal shutdown process that is located in the web configuration. Power Port The Power Input port is where the power cord plugs in. Never remove the power cord while the Instant Gigadrive™ is turned on. Printer Port You can also add a printer to your network through the Instant GigaDrive's Printer port. You attach a printer using DB-25 printer cable. 3