Linksys PLK200 User Guide - Page 8

PowerLine AV Ethernet Adapter Chapter 3: Getting to Know the Adapter The Bottom Panel The Ethernet port is located on the bottom panel of the Adapter. Ethernet Port The Ethernet port connects to an Ethernet network cable. The other end of the cable will connect to your computer or other Ethernet-enabled network device. The Back Panel Figure 3-1: Bottom Panel The power plug and Device Password are located on the back panel of the Adapter. Power Plug The power plug connects to an electrical outlet in your location. IMPORTANT: Because the Adapter sends data over the powerlines of your residence, Linksys recommends that you plug the Adapter directly into an electrical outlet. The Adapter has its own power filter for protection against surges. Device Password The Device Password is located on the sticker. If you are adding this Adapter to a pre-existing powerline network with your own Network Password (not the default), then you may need to enter the Device Password on the Security tab of the Configuration Utility. For more information, refer to "Chapter 5: Using the Configuration Utility." Chapter 3: Getting to Know the Adapter The Bottom Panel Figure 3-2: Back Panel 2