Linksys WAP54GX User Guide - Page 26
Wireless, Administration, Status, Basic Wireless Settings - reset
UPC - 745883565740
View all Linksys WAP54GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Wireless-G Access Point with SRX Wireless You will use the Wireless tabs to enter a variety of wireless settings for the Access Point. • Basic Wireless Settings. Enter the network mode, SSID, and other basic settings on this screen. • Wireless Security. Use this screen to configure the Access Point's wireless security settings. • Wireless MAC Filter. From this screen, you can allow access to your wireless network by MAC address. • Advanced Wireless Settings. Configure the Access Point's more advanced wireless settings. Administration You will use the Administration tabs to manage the Access Point. • Management. This screen allows you to customize the password settings, as well as back up or restore the Access Point's configuration file. • Log. Configure the Log settings for the Access Point on this screen. • Factory Defaults. Use this screen to reset the Access Point to its factory default settings. • Firmware Upgrade. Upgrade the Access Point's firmware on this screen. Status You will be able to view status information for your local and wireless network. • Local Network. This screen will display current information on the Access Point and its local network. • Wireless Network. This screen will display current information on the Access Point and its wireless network. firmware: the programming code that runs a networking device. Chapter 6: Configuring the Wireless-G Access Point with SRX 20 Navigating the Utility