Linksys WAP54GX User Guide - Page 38
The Administration - Factory Defaults Tab, The Administration - Firmware Upgrade Tab, Management
UPC - 745883565740
View all Linksys WAP54GX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Wireless-G Access Point with SRX The Administration - Factory Defaults Tab On this screen you can restore the Access Point's factory default settings. Management Write down any custom settings before you restore the factory defaults. Once the Access Point is reset, you will have to re-enter all of your configuration settings. Factory Defaults Restore Factory Defaults. To restore the Access Point's factory default settings, click this button. Then follow the on-screen instructions. Click Help for more information. The Administration - Firmware Upgrade Tab On this screen you can upgrade the Access Point's firmware. Do not upgrade the firmware unless you are experiencing problems with the Access Point or the new firmware has a feature you want to use. Firmware Upgrade Before you upgrade the Access Point's firmware, write down all of your custom settings. After you upgrade its firmware, you will have to re-enter all of your configuration settings. To upgrade the Access Point's firmware: 1. Download the firmware upgrade file from the Linksys website, www.linksys.com. 2. Extract the firmware upgrade file on your computer. 3. On the Firmware Upgrade screen, enter the location of the firmware upgrade file in the field provided, or click the Browse button to find the file. 4. Click the Upgrade button, and follow the on-screen instructions. Click Help for more information. Figure 6-17: Administration - Factory Defaults Screen Figure 6-18: Administration - Firmware Upgrade Screen upgrade: to replace existing software or firmware with a newer version Chapter 6: Configuring the Wireless-G Access Point with SRX 32 The Administration - Factory Defaults Tab