Linksys WAP54GX User Guide - Page 33

Wireless-G Access Point with SRX The Wireless - Wireless MAC Filter Tab This screen allows you to permit or block wireless access for computers with specific MAC addresses. Wireless MAC Filter Access Restriction If you want to allow access to your wireless network, select Enable. Then, click Permit PCs listed below to access the wireless network. MAC 1-50. Enter the MAC addresses of the computers whose access you want to allow. To see a list of MAC addresses for wireless computers or clients, click the Wireless Client Table button. The Wireless Client List screen will list MAC addresses for your wireless devices. Click the Refresh button to get the most up-to-date information. To add a specific computer to the Mac Address Filter List, click the Save to MAC Filter button and then the Add button. Click the Close button to return to the Wireless MAC Address Filter screen. Click the Clear button if you want to delete a MAC addresses you have entered. Change these settings as described here and click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Click Help for more information. Figure 6-11: Wireless - Wireless MAC Filter Screen mac address: the unique address that a manufacturer assigns to each networking device. Chapter 6: Configuring the Wireless-G Access Point with SRX The Wireless - Wireless MAC Filter Tab Figure 6-12: Wireless - Wireless Client Table 27