Lowrance HDS-12 Gen2 Touch Operation Manual - Page 48

Bytes per sounding Select how many bytes per seconds that are to be used when saving the log file. More bytes yield better resolution, but will cause the recorded file to increase in size compared to using lower byte settings. Log all channels Logs Broadband and Structurescan sonar data simultaneously. When logging all channels, logs are saved in .sl2 format instead of .slg format. When the sonar image is being recorded, there will be a flashing red symbol and a message will appear periodically at the bottom of the screen. The sonar recording is stopped by re-selecting the Record function. Recording symbol Logging message Viewing recorded sonar data Stored sonar logs may be reviewed when selected. Sonar logs can be viewed by tapping View sonar log on the Sonar settings menu. The log file is displayed as a paused image, and you control the scrolling and display from the replay menu. You can use the cursor on the replay image, and pan the image by tapping and dragging on the screen as on a normal sonar image. You exit the replay mode by tapping the Close button. The function is activated from Sonar settings menu covered later in this section. 46 | Sonar | Lowrance HDS Gen2 Touch