Lowrance HDS-5m Gen2 HDS 5m 7m Operation Manual - Page 16
Configuration menu, Add Source, To use Add Source, To remove add source data
View all Lowrance HDS-5m Gen2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Pages Configuration menu Allows you to Add/Remove sources and adjust Bezel, Caption and Invert Text Settings. Other configuration menu options are covered previously in the section. To access the Configuration menu, highlight Configuration on the Edit Overlay menu and press enter. Bezel Caption Invert Text Configuration Settings Adds a bezel to the data overlay gauge, making it easier to see against certain backgrounds Allows you to add/remove data label from gauge Changes appearance of data overlay text Add Source Displays the same type of data from different sources on the same analog gauge. If, for example, you have multiple engines, you could select port engine RPM as your data type and then display starboard engine RPM using the Add source command. Both data sources could be displayed simultaneously on an analog gauge with two needles; one dedicated to each source. Add Source menu To use Add Source: 1. Select Add Source from the Edit Overlay menu and press enter. The Add source menu will appear. 2. Highlight a category a press enter. A list of subcategories will appear. 3. Select the desired subcategory and press enter. Analog gauge showing RPM from two engines. To remove add source data: 1. Highlight Remove source from the Edit Overlay menu and press enter. A list of sources will appear. 2. Select the source you want to remove and press enter. 14